Its hard surface pressure washing and recovery, now conveniently truck-mounted. The SK provides a cleaning system with a water heater and recovery tank to be used with the CY210 walk-behind pressure washer (standard with the CY5500SK2). You can move the whole shebang between locations with ease, since all the storage you need is built in, and an automatic loading/unloading lift gate is attached for the CY210 walk-behind unit.
How It Works
- The CY210’s cleaning head, with its 2 high-pressure water nozzles and 8 turbine blades, rotates at high speed to create a vortex of air and water equivalent to a category 4 cyclone storm.
- The continuous air movement scours the surface and creates lift that recovers the water along with removed dirt and debris, deep cleaning with just a single pass.
- The same air movement flings the waste water into a small holding tank, where it is then pumped into the waste water reclaim tank – thereby completing the waste water recovery process without a vacuum system.
- An on-board multi-stage filtration system, standard on the SK, cleans and recycles recovered waste water – extending run-time and further reducing water consumption.
Key Features and Benefits
Technical Specifications
| Cyclone SK (Truck-Mounted Cleaning System) | |
|---|---|
| Water Capacity | 420 gal Combination |
| Wastewater Recovery Tank | Fiberglass with Patented Internal Separation Baffles, Easy Clean Out Tanks with Top Cap Access and 3″ drains |
| Filtration | (2) 75 micron and (2) 30 micron / Stainless Steel, Fully cleanable and reusable |
| Pressure Pump | 3,600psi @ 6GPM (248bar @ 22.7LPM) / Giant Pump |
| Power Source | Base Chassis Power Take Off |
| Fuel Tanks | Gasoline, Diesel |
| Run Time | Up to 6 hours (application dependent) |
| Productivity | Up to 12,000ft2 per hour |
| Pressure Lance | Standard 36″ Length |
| Pressure Hose | 100ft Standard for Both Supply and Recovery (other length options available) |
| Heater | Diesel-Fired Burner Standard for Water Heated up to 160°F |
| Chassis | Third Party Chassis Available (Ford F-550 Pictured) |
| Chassis (L x W x H) | 23ft L x 7ft 8in. W x 7ft 6in. H |
| CY210 Loading System | Side-Mounted Liftgate with Winch System |
| Weight (Full) | 15,500 lbs. (Full of water, with CY210) |
| Weight (Empty) | 12,000 lbs. (Empty, without CY210) |
| Cyclone CY210 (Walk-Behind Pressure Washer) | |
|---|---|
| Cleaning Path | 18″ |
| Input Pressure | Up to 5,500psi (379.2bar) |
| Pump Recommendations | 2,000 psi at 4GPM (137.9bar at 15.1LPM) (minimum) |
| Input Temperature | Up to 200°F |
| Power Source | Honda gasoline with electric start |
| Pressure Connections | Supply: 3/8″ male quick connect / Recovery: 1″ cam lock |
| Spray Tips | 2 spray tips protected by vented plate |
| Battery | 12V for starting |
| Weight | 410lbs. |
| Dimensions (L x W x H) | 68″ x 35″ x 42″ |